- Home
- Card Printer addremove
- Barcode addremove
- Security & Identity
- CCTV addremove
- Printing addremove
- Drivers & Support

Golden PVC Card
Reference:
Key Features:
Golden Blank PVC Card
Thikness: 30 mil
Type: PVC
Made in China
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)

Key Features:
Golden Blank PVC Card
Thikness: 30 mil
Type: PVC
Made in China
in the same category
Key Features:
Original Zebra Color Ribbon
Model: P330in
Ribbon Type: YMCKO
Capacity: 200 prints
Brand: Zebra
Made in USA
Key Features:
Model: CS200e
Brand: Hiti
Dual Side Printer
Made in Taiwan
2 Years Service Warranty
Device Specifications
Resolution: 300 dpi continuous tone
Printing Method: Dye Sublimation
Print size: CR-80 (2.13x3.37 inch / 53.98x85.6 mm)
Print Speed: 21 sec for a full color YMCKO & 4.5 sec for a resin black
Display: LCM with multi-language supported
USB interface: USB 2.0
Input Capacity: 100 cards (0.76mm / 30mil)
Output Capacity: 50 cards (0.76mm / 30mil)
-
- * High Quality Printing.
- * Outstanding design
- * High speed printing engine
- * Uptime increasing with less staff interruption
- * Wide-range, optional encoding modules
- * Intuitive user interface
- * Compact and lightweight body
- * Low noise in service
Key Features:
Model: CS200e
Type: Silver Monochrome Ribbon
Capacity: 1000 prints
Brand: Hiti
Others: With Cleaning card & Roller
Key Features:
Model: ZC300
Brand: Zebra
Single Side Printer
Standard Features:
- 300 dpi (11.8 dots/mm) print resolution
- 2 GB flash memory
- Image size: 1006 x 640 pixels
- Auto calibration of ribbon
- USB 2.0 connectivity
- Color YMCKO Print Speed: 150 Cards/Hour
- Monochrome Print Speed: 700 Cards/Hour
Physical Characteristics:
Dimensions : |
10.2 in. H x 6.2 in. W x 15.1 in. D 258 mm H x 157 mm W x 383 mm D |
Weight : | 8.6 lbs (3.9 kg) |
Model: High Trust
Type: PVC
Thikness: 0.76mm- 30 mil
Part Number: C4501
Brand: Evolis
Key Features:
Model: ZXP Series 7
Brand: Zebra
Single or Dual Side Printer
Standard Features :
- Color dye sublimation or monochrome thermal-transfer printing
- 300 dpi/11.8 dots per mm print resolution
- USB 2.0 and Ethernet 10/100 connectivity
- 802.11b/g wireless option
- Simultaneous printing, encoding, and laminating capability
- One-pass single- and dual-sided wasteless lamination
- 1375 cards / hour monochrome single-sided or 555 cards / hour dual sided printing
- 300 cards / hour full-color YMCKO single-sided printing
- 225 cards / hour full-color YMCKOK dual-sided printing
- 270 cards / hour full-color YMCKO single-sided printing with lamination
Physical Characteristics :
Dimensions | Printer only : 12 in. H x 10.9 in. L x 27.5 in. W 306 mm H x 277 mm D x 699 mm W Printer with laminator: 12 in. H x 10.9 in. L x 38 in. W 306 mm H x 277 mm D x 964 mm W |
Weight | Printer only : 26.9 lbs/12.2 kg Printer with laminator: 39.5 lbs/17.9 kg |
Model: ZC300
Type: Cleaning card
Brand: Zebra
Made in USA
Key Features:
Magnetic Stripe PVC White Card
Material : PVC
Quality: High Quality
Size : 85.5mm x 54mm (Standard)
Encodding Type: Contact Less
Standard Packing: 200 pcs (1box)
Minimum Order: 100 pcs
Made in China
- Frequency : 860 ~ 960MHz
- Protocol : ISO18000-6C/EPC Gen2
- Reading Distance: Up to 10 meters for UHF1-10E and UHF1-10F (Determined by the environment and reader)
- EEPROM Size : EPC 128bits, User 32-512bits
- Material : PVC
- Operating Mode : Passive
- Temperature : -25°C ~ +75°C
- Write Endurance : 10,000(cycles)
- Dimension : 85.6 × 54.0 × 0.86 ( mm )
Key Features:
NFC Card
Operating frequency: 13.56 MHz
Protocol: ISO 14443 A
Rewriteable multiple times and can be locked when required
Antenna size: 60mm x 40mm
Card: 85.5mm x 54mm x 0.84mm with rounded corners
1152 bit / 144 bytes of user memory with unique 7 byte
colour: white
Material: PVC
Standard Features :
NFC NFC (Near Field Communication) is really an extend of RFID .Therere four types be defined for NFC type 1,type 2, type 3, type 4, those type formats are based on ISO14443A and B which is the international standard for contactless smartcards. Therere different rfid chips with frequency 13.56mhz for NFC technology , compatible, Ultralight, NTAG series. In general, NTAG series are compatible with every NFC device (NTAG203, NTAG212, Ntag213, Ntag215, Ntag216). NFC into different types NFC Sticker label, NFC card, NFC keyfob, NFC wristband and so on. Common NFC Tags cant work on metal surfaces. If need to use the NFC close to metal, need with metal layer to be on-metal NFC tag Features 13.56MHz MF1 Induction Smart IC Card ISO14443 Easy to carry Supported by any S50 card reader Auto detect card memory The card made of high temperature composite materials Specifications Operating Frequency 13.56MHz Storage Capacity 8Kbit, 16 districts, each district two passwords Read Distance 2.5-10cm 106kbit/s fast data transfer. Card Life Write endurance 100,000 cycles. ISO/IEC 14443 RF Interface.
Key Features:
Model: F10723-A
Brand: Evolis
Output: 18-24V, 3.61-2.70A
Input: 100-240V ~ 1.8A 50-60Hz
For Using: Primacy, Primacy 2, Pebble 1-4
Model: CS200e
Type: Thermal
DPI: 300dpi
Brand: Hiti
Made in Taiwan
Model: Zxp Series 3
Type: Thermal
DPI: 300dpi
Brand: Zebra
Key Features:
Original Evolis Globes Hologram Ribbon
Model: Primacy
Ribbon Type: Globes Hologram
Capacity: 400 prints
Customized Logo: Optional
Part Number:
Brand: Evolis
Made in France
Device Specifications
Resolution | Customizable 300 x 600 dpi resolution (color and monochrome printing) or 300 x 1200 dpi resolution (monochrome printing only) |
Printing Method | Direct-to-card dye-sublimation/Resin thermal transfer |
Interfaces | USB, Ethernet, Wifi (optional) |
Printing Speed |
Single side : 225 cards/hour Dual side : 140 cards/hour |
Card Lamination | Dual-sided Card Lamination Module (CLM) as an option |